Dual Motor Vertical Shaft Crusher PLC Auto Lubrication Eccentric Shaft Jaw Crusher

XY-9500 VSI Crusher with Dual Motor Drive, Four Working Modes, and PLC Auto Lubrication

What Makes This VSI Different

Ask any plant operator what frustrates them most about conventional VSI crushers. The answers are predictable: wear parts that don't last, mode switching that takes too long, bearing failures from dust, and daily oil checks that interrupt production. The XY Vertical Shaft Impact Crusher was designed specifically to eliminate these frustrations.

Stop Taking Apart Your Crusher to Change Modes

Traditional VSI crushers force you to disassemble the distribution cone when switching feed configurations. The XY VSI removes this bottleneck. A dual-purpose distributor disk lets you change modes by simply adjusting settings. No tools. No disassembly. No wasted hours.

Four modes are available: Rock-on-Rock and Rock-on-Iron, each with either full center feed or center feed plus cascading feed. Whether you need sand, shaped aggregate, or fine powder, the switch takes minutes instead of hours.

Let Material Flow, Not Fight It

Most VSI crushers force material through sharp turns and abrupt channel changes. Every turn creates resistance. Every resistance point steals throughput. The XY VSI takes the opposite approach. Its deep-cavity impeller uses smooth curved surfaces at every discharge port and internal passage. Material follows a natural path. Resistance drops. Throughput rises by 30%. For 0–6mm sand production, efficiency hits 40–45%.

Two Sides to Every Impact Block

Every impact block in the XY VSI has a simple but powerful feature: it is symmetrical. The upper and lower halves are identical. When the lower half wears down, you do not buy a new block. You flip it. The worn half moves to the top, and the fresh half takes the impact. This one design choice extends component life by more than 48%.

The hammer head tells a similar story. Instead of a single monolithic part, it uses a modular design. Only the worn section gets replaced. Operating costs drop by more than 30%.

The diamond-shaped impact blocks fit tighter than conventional designs. They do not shift or loosen under impact. They protect the vertical plates while absorbing material impact more effectively.

For ultra-hard stone, Rock-on-Rock mode delivers the lowest wear cost of any configuration.

Dust Is The Enemy. This Bearing Housing Wins.

Dust finds its way into everything. On a conventional VSI, dust eventually penetrates the bearing housing, contaminates oil, and causes leakage from the lower bearing cap. The XY VSI features a completely new bearing housing with a sealing structure designed specifically to block dust ingress. Top-brand bearings sit inside, protected. Service life doubles.

No Daily Oil Refilling

The XY VSI runs on an air-cooled thin-oil lubrication system controlled by PLC automation. The system monitors feed volume, current, oil temperature, and main shaft temperature continuously. It provides oil shortage protection and automatic temperature regulation. Your team does not need to shut down the crusher every day to check or refill oil. The system handles it automatically.

Dual-motor drive and automatic lubrication also mean uniform loading on the main shaft. The machine runs smoother. Vibration decreases. Every component lasts longer.

One Machine. Four Modes. Less Downtime. Lower Cost.

The XY Vertical Shaft Impact Crusher is not a collection of generic features. It is a set of deliberate solutions to the real problems VSI users face every day. Fewer wear part changes. Faster mode switching. Longer bearing life. No daily oil refilling.

That is the XY difference.